Charge Controller 1000W MPPT Wind Turbine 24V/48V for and 600W Solar Panel
Charge Controller 1000W MPPT Wind Turbine 24V/48V for and 600W Solar Panel
- 70 % Off$93.99
Description
SPECIFICATIONS:
- Is_customized: Yes
- Model Number: RX-600MPPT-MS
- Application: Charger Controller
Description:
Super-intelligent wind-solar hybrid controller is a cost-effective control device optimized by our company on the basis of super intelligent controller. It inherits most of the practical functions (such as speed control, limit protection of over-current, over-voltage etc.) and reduces the scalability, so it has a very high cost-performance ratio. It’s suitable for mass and low cost use.
Â
Â
Â
Three-protected circuit board, and waterproof jacket, both protect the device from damage due to taking in water slightly.
Â
Standard configuration of mini port TTL232 communication, it is easy to do the monitoring with the computer software. (RS485, short-range wireless is optional). Using a USB to RS232 members, more convenient to exchange data with a computer (computer with USB interface can be used).
Â
Photovoltaic panels will not be damaged with continuous reverse connection at the input port; it can work normally after correction.
Â
ican provide automatically tracking mode of wind turbine maximum input power, or the mode of 5 segments match curve input configuration (input rev to input current; or input voltage to input current curve), which makes the high efficient generation of the wind turbine, but with low speed.
Â
It provides selection of multiple output modes (light control, time control, dawn mode, reverse direction), which can satisfy a variety of applications.
Â
Â
The controller screen displays not only the current, voltage, power of conventional wind turbine, PV, battery, and the output port; but also the cumulative generating capacity of wind turbine and PV, the remaining battery power, wind turbine speed.
Â
Technical data:
|
Battery parameters |
||
|
Applicable battery voltage |
24V |
48V |
|
Battery protect method |
Reverse connection protection (Â Blow Fuse); over voltage protection, under voltage protection (for street light and such kind of load) |
|
|
Voltage at the over voltage protection point |
29.0V±0.2V |
58.0V±0.2V |
|
Voltage at the over voltage recovery point |
27.5V±0.2V |
55.0V±0.2V |
|
Voltage at the under voltage protection point |
21.0V±0.2V |
42.0V±0.2V |
|
Voltage at the under voltage  recovery point |
23.0V±0.2V |
46.0V±0.2V |
|
Parameters of wind turbine input port |
||
|
Rated power of applied wind turbine |
1000W |
|
|
Rated current of the port |
20A dc (after rectification) |
15A dc (after rectification) |
|
Max. input current of the port |
25A dc (after rectification) |
20A dc (after rectification) |
|
Default speed of the wind turbine generation with limited speed |
500 Rpm (settable) |
|
|
Default current of the wind turbine generation with limited current |
20A (settable) |
|
|
wind turbine protection method |
Over speed protection, over current protection, induction lightening protection |
|
|
Unloading method |
PWM stepless high-frequency soft unloading (built-in) |
|
|
MPPT function |
Boost MPPT model ( automatic tracking or 5 segments curve tracking) |
|
|
Input current of MPPT channel |
5AÂ (standard configuration) |
|
|
Parameters of PV input port |
||
|
Rated power of applied PV |
300W/24VÂ Â 600W/48V |
|
|
Charging voltage drop |
<0.2V |
|
|
PV protection method |
Reverse connection protection |
|
|
Unloading method |
Open circuit unloading |
|
|
Display mode |
3 digitsl (LED) display |
|
|
Communication mode |
RS232 (5V electrical level) (standard configuration), RS485/Short-range wireless RF (optional configuration) |
|
|
Displayed parameters |
wind turbine input voltage/current/power/generated capacity/ speed/ unloading current PV input voltage/current/power/generated capacity Battery voltage/charging current/power/total charging capacity/ battery status information |
|
|
Operating mode |
3M foil key operation (2 buttons) |
|
|
Working temperature / humidity range (environment) |
-40~+80℃/20~85%RH (non condensing) |
|
|
Protection grade |
IP41 |
|
|
Controller size ( Dump load size |
158mm*113mm *60mm 400*1101*155mm |
|
|
Net weight |
6.0KG |
|
Â
 Picture:
Â
Â
Â
Â
Â
Â
Â
Â
Â
Application:
Additional information
| Color | 1kw wind 300w solar, 1kw wind 600w solar |
|---|---|
| Rated Voltage | 24V, 48V |
| Controller Type | External Wind-Solar Hybrid |
Related products
-
- 69 % Off -
-70% Off -
- 70 % Off -
-68% Off
